Difficulty
Easy
Steps
10
Time Required
20 minutes
Sections
1
- Air Filter Casing
- 10 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackWexford CT-166TF
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Air Filter Casing
- Using a plastic opening tool, remove the four small foam pieces on the bottom of the fan.
Using a plastic opening tool, remove the four small foam pieces on the bottom of the fan.
1024
Step 2
- Remove the four screws that were uncovered in the previous step.
- Remove the bottom cover using a spudger if needed.
Remove the four screws that were uncovered in the previous step.
Remove the bottom cover using a spudger if needed.
Step 3
- Remove the five screws that can be seen by aligning the base and the fan.
Remove the five screws that can be seen by aligning the base and the fan.
Step 4
- Stand the fan upright. Locate and remove the two screws near the top.
Stand the fan upright. Locate and remove the two screws near the top.
Step 5
- Locate and remove the two bottom screws.
Locate and remove the two bottom screws.
Step 6
- Remove the back casing by pulling it away from the front casing.
Remove the back casing by pulling it away from the front casing.
Step 7
- Remove the two screws attaching the motor to the front casing.
Remove the two screws attaching the motor to the front casing.
Step 8
- Remove the two middle screws connecting the air filter casing to the front casing.
- Remove the front casing.
Remove the two middle screws connecting the air filter casing to the front casing.
Remove the front casing.
Step 9
- Remove the four remain screws holding the air filter casing together
Remove the four remain screws holding the air filter casing together
Step 10
- Put the new air filter casing in place after cleaning the filter.
- Repeat steps 1-9 in reverse order to properly put back together the fan.
Put the new air filter casing in place after cleaning the filter.
Repeat steps 1-9 in reverse order to properly put back together the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Dannis Thompson
Member since: 04/10/2017
261 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
UW Tacoma, Team S3-G4, Liner Spring 2017
Member of UW Tacoma, Team S3-G4, Liner Spring 2017
UWT-LINER-S17S3G4
4 Members
3 Guides authored
