Water Damage On Main Board Of Nokia 206 Rm873 Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          30 minutes            

Sections

1

• Water Damage on main board of Nokia 206 RM873
• 6 steps

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackNokia 206

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

it’s a simple cell phone and quite easy to repair.

enjoy

What you need

Step 1

              Water Damage on main board of Nokia 206 RM873               

• Remove back cover & battery.

Remove back cover & battery.

1024

Step 2

• Remove the front case by prying it open. You will hear clicks.
• Be careful with taking off screen if you use a spudger.

Remove the front case by prying it open. You will hear clicks.

Be careful with taking off screen if you use a spudger.

Step 3

• Use a Torx screwdriver to remove the screen screws.
• Use a spudger or tweezers to remove the connector of the LCD screen.

Use a Torx screwdriver to remove the screen screws.

Use a spudger or tweezers to remove the connector of the LCD screen.

Step 4

• Remove keyboard by prying it open with a spudger.
• The keyboard is secured with adhesive, be careful!

Remove keyboard by prying it open with a spudger.

The keyboard is secured with adhesive, be careful!

Step 5

• The PCB board had water damage, see this in picture 3.
• To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

The PCB board had water damage, see this in picture 3.

To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

Step 6

• How and where to use the cotton swabs.

How and where to use the cotton swabs.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      16 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Kevin D                     

Member since: 05/02/2014

7,090 Reputation

                                      21 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

nabhan75 - Mar 18, 2018

Reply

no use .it is not switching on . replaced with good batter also. no on

Kevin D - Mar 20, 2018

Reply

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Mithilesh Yadav - Sep 23, 2020

Reply

Nokia 206 display and charger pin

K .M Jugesh - Aug 14, 2022

Reply

Not working kiy 1.2.3 and colling ricev kiy not working