Watch Battery Replacement Repair Guide

Difficulty

Easy

Steps

10

Time Required

                          30 seconds            

Sections

1

• Battery
• 10 steps

Flags

0

• BackWatch

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• For this project you will need the watch you are replacing the battery on, the new battery and a mini flat head screwdriver.

For this project you will need the watch you are replacing the battery on, the new battery and a mini flat head screwdriver.

1024

Step 2

• You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch.

You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch.

Step 3

• Take the white plastic ring out of the watch. You can use the mini flat head screwdriver or your finger to pull it out.

Take the white plastic ring out of the watch. You can use the mini flat head screwdriver or your finger to pull it out.

Step 4

• Take the old battery out of the watch. You can use the mini flat head screwdriver to do this.

Take the old battery out of the watch. You can use the mini flat head screwdriver to do this.

Step 5

• Put the new battery in watch. Use your fingers to insert the new battery.

Put the new battery in watch. Use your fingers to insert the new battery.

Step 6

• Use your fingers to insert the plastic white ring back into the watch.

Use your fingers to insert the plastic white ring back into the watch.

Step 7

• Put the back of the watch on using your fingers. Press down so that you hear a snap to ensure the back is on properly.

Put the back of the watch on using your fingers. Press down so that you hear a snap to ensure the back is on properly.

Step 8

• You are all done and can now set the time on your watch.

You are all done and can now set the time on your watch.

Step 9

• When you are not using the watch, pull the pin out to stop the watch from running

When you are not using the watch, pull the pin out to stop the watch from running

Step 10

• When the pin is pulled out, the battery is not being used. Only push the pin in and set the time when you are using the watch. This will preserve the life of your new battery.

When the pin is pulled out, the battery is not being used. Only push the pin in and set the time when you are using the watch. This will preserve the life of your new battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    TIMONTE HUNTER                     

Member since: 03/02/2016

364 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Pasco Hernando, Team 5-10, Prince Winter 2016                        

                                                  Member of Pasco Hernando, Team 5-10, Prince Winter 2016 



                    PHSC-PRINCE-W16S5G10                     


                                            2 Members                     


                                            2 Guides authored                     

barbaramcraig - Nov 27, 2018

Reply

First time I have done this and I have somehow lost the white plastic! Is this essential?

jybentneedle48 - Jan 29, 2019

Reply

Yes. I can’t get the plastic spacer back in right. I guess that is why I can’t get the back.

karmstrong20112012 - Sep 12, 2019

Reply

I’m trying to figure out the type of watch that is can anyone help me that? This is the only place I can find an image of it. I recently purchased it private sale and they couldn’t remember.

Austin Blakely - Sep 13, 2019

Googling the model number on the back, LDC74709W, leads me to believe it’s an unbranded watch that was sold at Walmart in the past.