Difficulty

Easy

Steps

6

Time Required

                          20 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Hot Plate
  • 3 steps

Flags

0

  • BackWaring Pro SB30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Remove the screws on the back panel with the #1 Phillips screwdriver bit.
  • The screws in the rubber legs of the burner do not need to be removed.
  • If the back panel has never been opened before, the screws may be more difficult to unscrew.

Remove the screws on the back panel with the #1 Phillips screwdriver bit.

The screws in the rubber legs of the burner do not need to be removed.

If the back panel has never been opened before, the screws may be more difficult to unscrew.

1024

Step 2

  • Using a wrench, remove the bolt from the center of the back panel.

Using a wrench, remove the bolt from the center of the back panel.

Step 3

  • The back panel can now be easily lifted off.

The back panel can now be easily lifted off.

Step 4

              Hot Plate
  • Remove screws #1 Phillips screwdriver bit.
  • The interior edges of the metal frame are sharp and can cause minor cuts.
  • 3 screws on the perimeter of the circle
  • 1 screw in the circle
  • 2 screws on the eletrical stands with wires

Remove screws #1 Phillips screwdriver bit.

The interior edges of the metal frame are sharp and can cause minor cuts.

3 screws on the perimeter of the circle

1 screw in the circle

2 screws on the eletrical stands with wires

Step 5

  • Remove rod from the center of the plate with a wrench.

Remove rod from the center of the plate with a wrench.

Step 6

  • Remove plate carefully as to not damage internal components i.e. insulator, metal frame, wires, etc.

Remove plate carefully as to not damage internal components i.e. insulator, metal frame, wires, etc.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Sun Fai Lau

Member since: 09/22/2014

588 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 10-7, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 10-7, Brown Fall 2014 



                    USFT-BROWN-F14S10G7                     


                                            3 Members                     


                                            5 Guides authored