Wahl Professional Designer Power Switch Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          5 minutes            

Sections

1

• Power Switch
• 3 steps

Flags

0

• BackWahl Professional Designer

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Switch               

• Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

1024

Step 2

• Unscrew the two black 5.556 mm Phillip head screw on the power switch with a Phillips #0 Screwdriver.

Unscrew the two black 5.556 mm Phillip head screw on the power switch with a Phillips #0 Screwdriver.

Step 3

• Shimmy the power switch off the mount until it is completely removed.

Shimmy the power switch off the mount until it is completely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Sophia Swearengin                     

Member since: 09/26/2017

694 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S14-G5, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G5, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G5                     


                                            2 Members                     


                                            5 Guides authored                     

Carlos Olvera - Apr 23, 2020

Reply

Hello Mrs/ms Swearengin, I’m disassembled my Wahl desingner I’m unable to make the power switch stiff . It’s very loose I can’t recall which screw goes in between two black 5.556 mm Phillip head screw or if it needs a screw at all