Wacom Intuos Pro Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Battery
5 steps

Flags

BackWacom Intuos Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Orient the device so the bottom casing is facing upwards.
Use your fingers to gently pull on the rubber covers on the bottom of the device to remove them.

Orient the device so the bottom casing is facing upwards.

Use your fingers to gently pull on the rubber covers on the bottom of the device to remove them.

1024

Step 2

Remove the four 4mm screws from underneath the rubber feet using a Phillips #00 screwdriver.

Remove the four 4mm screws from underneath the rubber feet using a Phillips #00 screwdriver.

Step 3

Insert the iFixit Opening Tool between the front and back cover of the device in order to snap and separate the type locks from around the edges.
Use the iFixit Opening Tool all the way around the edges until all the snaps have been released.
While going around the edges, make sure you have a tight grip to keep the device from sliding.

Insert the iFixit Opening Tool between the front and back cover of the device in order to snap and separate the type locks from around the edges.

Use the iFixit Opening Tool all the way around the edges until all the snaps have been released.

While going around the edges, make sure you have a tight grip to keep the device from sliding.

Step 4

Remove the case backing from the rear of the device with your hands so the internal components are exposed.

Remove the case backing from the rear of the device with your hands so the internal components are exposed.

Step 5

If not already done, desolder the three colored cables that connect the battery to the motherboard.
After desoldering the battery, carefully remove it.
Be careful when handling the soldering iron given it’s high operating temperature and the possibility for it to damage other components.
For help soldering, check out our How to Solder and Desolder Connections guide.

If not already done, desolder the three colored cables that connect the battery to the motherboard.

After desoldering the battery, carefully remove it.

Be careful when handling the soldering iron given it’s high operating temperature and the possibility for it to damage other components.

For help soldering, check out our How to Solder and Desolder Connections guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors

                    chris peterson

Member since: 01/22/2020

198 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Embry-Riddle Aeronautical University, Team S6-G3, Watkins Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S6-G3, Watkins Spring 2020 



                    ERAU-WATKINS-S20S6G3                     


                                            4 Members                     


                                            3 Guides authored

Sebastian Ramirez - Mar 19, 2021

thank you so much. I plan to buy this wacom, however I had the doubt if better the old version that has extractable battery, but with this post, I can go for the new one

Valerio _ - Jun 1, 2021

Do you know where can I find the battery replacement?

Introduction#

What you need#

Team#

Introduction

What you need

Team