Difficulty
Easy
Steps
3
Time Required
3 - 8 minutes
Sections
1
- Stand
- 3 steps
Flags
0
BackWacom Cintiq 24HD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Stand
- Unplug any cables from the USB, power, display or DVI-D ports by gripping the cord by the connector and pulling straight out of the port.
- Unplugging the cables by pulling on the cord or pulling at an angle can damage the cable or connector.
Unplug any cables from the USB, power, display or DVI-D ports by gripping the cord by the connector and pulling straight out of the port.
Unplugging the cables by pulling on the cord or pulling at an angle can damage the cable or connector.
1024
Step 2
- Place the device screen down on a flat surface.
- Remove eight 10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.
Place the device screen down on a flat surface.
Remove eight 10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.
Step 3
- Lift the stand up and away from the rest of the device so the legs separate from the mounting plate.
Lift the stand up and away from the rest of the device so the legs separate from the mounting plate.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Andrew Fleming
Member since: 10/08/2018
408 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S15-G3, White Fall 2018
Member of Cal Poly, Team S15-G3, White Fall 2018
CPSU-WHITE-F18S15G3
4 Members
9 Guides authored