Wacker Compactor Plate Vp1550Aw 2014 Shockmount Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Wacker Compactor Plate VP1550AW 2014 Safety Precautions
1 step
Shockmount
3 steps

Flags

BackWacker Compactor Plate VP1550AW (2014)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

The shockmounts are easy to access and replace.

What you need

Step 1

              Safety precautions

Before you begin, be sure that the engine is powered off and is cool to the touch.
Grab the plastic housing at the end of the spark plug wire.
Pull firmly to disconnect the wire from the spark plug.

Before you begin, be sure that the engine is powered off and is cool to the touch.

Grab the plastic housing at the end of the spark plug wire.

Pull firmly to disconnect the wire from the spark plug.

1024

Step 2

              Loosen the handle

For ease of access, swing the transport wheels underneath the plate compactor before you begin.
Use a 3/4" wrench to remove the two nuts securing the handle.
Use your palm to push against the shockmount to prevent it from slipping.
Remove the nuts and washers and retain them for reassembly.

For ease of access, swing the transport wheels underneath the plate compactor before you begin.

Use a 3/4" wrench to remove the two nuts securing the handle.

Use your palm to push against the shockmount to prevent it from slipping.

Remove the nuts and washers and retain them for reassembly.

Step 3

              Lower the handle

Tilt the guide handle forward to pivot the shockmount bolts out of the base grooves.
Slide the guide handle down enough to access the shockmounts.

Tilt the guide handle forward to pivot the shockmount bolts out of the base grooves.

Slide the guide handle down enough to access the shockmounts.

Step 4

              Remove the shockmount

Pull the shockmount out of the guide handle.

Pull the shockmount out of the guide handle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Arthur Shi

Member since: 01/03/2018

211,868 Reputation

                                      442 Guides authored                  



                       Badges:
                       46







                                                        +43 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team