Vupoint Dc St210 Vp Battery Door Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 20 minutes

Sections

Back Plate
3 steps
Battery Door Cover
3 steps

Flags

BackVuPoint DC-ST210-VP
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Turn Off/Remove Batteries

Hold the on/off button for 3 seconds until the screen is black.
Remove batteries by placing thumb on battery plate cover sliding it down to expose batteries.
Turn camera upside down to allow the batteries to fall out.

Hold the on/off button for 3 seconds until the screen is black.

Remove batteries by placing thumb on battery plate cover sliding it down to expose batteries.

Turn camera upside down to allow the batteries to fall out.

1024

Step 2

              Remove Screws

There are 5 (4.5mm in length) screws on the sides of the camera that need to be removed. Use a Phillips #000 screwdriver to remove all screws.
Remove 2 screws on the right side of the camera, and store them on a magnetic mat.
Remove 2 screws on the bottom of the camera, and store them on a magnetic mat.
Remove 1 screw on the left side of the camera, and store it on a magnetic mat.

There are 5 (4.5mm in length) screws on the sides of the camera that need to be removed. Use a Phillips #000 screwdriver to remove all screws.

Remove 2 screws on the right side of the camera, and store them on a magnetic mat.

Remove 2 screws on the bottom of the camera, and store them on a magnetic mat.

Remove 1 screw on the left side of the camera, and store it on a magnetic mat.

Step 3

              Pry Backplate Off

Using a prying tool or fingernail, gently separate the back plate from the front plate, exposing the inside of the camera.

Using a prying tool or fingernail, gently separate the back plate from the front plate, exposing the inside of the camera.

Step 4

              Remove Battery Case Screw

Remove the 4.5mm screw with the iFixit ph#00 screwdriver

Remove the 4.5mm screw with the iFixit ph#00 screwdriver

Step 5

              Open the Battery Case

With your fingers, gently pull the two pieces of the battery case apart. At this point, the battery door should be exposed

With your fingers, gently pull the two pieces of the battery case apart. At this point, the battery door should be exposed

Step 6

              Remove the Battery Cover

With your fingers, gently remove the battery door.
Now you are free to repair or replace the battery door! Follow these steps in reverse order to reassemble the camera.

With your fingers, gently remove the battery door.

Now you are free to repair or replace the battery door! Follow these steps in reverse order to reassemble the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    Elise Brown

Member since: 10/26/2014

70 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Baylor, Team 8-15, Williams Fall 2014                        

                                                  Member of Baylor, Team 8-15, Williams Fall 2014 



                    BU-WILLIAMS-F14S8G15                     


                                            3 Members                     


                                            5 Guides authored

What you need#

Team#

What you need

Team