Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Back Panel
- 2 steps
- Battery
- 3 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackVulcan Venture II VNB14002IE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Use a J00 screwdriver to unscrew the 10 back-plate screws.
Use a J00 screwdriver to unscrew the 10 back-plate screws.
1024
Step 2
- Using light pressure, slowly wiggle off the back panel.
Using light pressure, slowly wiggle off the back panel.
Step 3
Battery
- Use a J00 screwdriver to unscrew the 4 battery screws .
Use a J00 screwdriver to unscrew the 4 battery screws .
Step 4
- Remove the black adhesive strip covering the battery connector.
Remove the black adhesive strip covering the battery connector.
Step 5
- Gently remove the battery connector by slowly applying pressure on the connector in the direction of the battery.
Gently remove the battery connector by slowly applying pressure on the connector in the direction of the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Parish Brandt
Member since: 09/21/2018
615 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
University of North Texas, Team S1-G5, Riccardelli Fall 2018
Member of University of North Texas, Team S1-G5, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S1G5
4 Members
7 Guides authored
