Vtechcs6719 16 Speaker Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          20 minutes

Sections

Speaker
8 steps

Flags

BackVTechCS6719-16
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Remove the sliding cover on the back of the phone case.

Remove the sliding cover on the back of the phone case.

1024

Step 2

Now remove the battery by lifting it and removing the two pin cable.

Now remove the battery by lifting it and removing the two pin cable.

Step 3

Unscrew the two 10mm screws on the back of the phone base.

Unscrew the two 10mm screws on the back of the phone base.

Step 4

Using the metal spudger edge along the phone and locate the hooks and latches.
Locating each of them apply a light but firm lifting force to release the front and back case.

Using the metal spudger edge along the phone and locate the hooks and latches.

Locating each of them apply a light but firm lifting force to release the front and back case.

Step 5

The front case should now be freed.
Put the front case aside for later.

The front case should now be freed.

Put the front case aside for later.

Step 6

There are two 10mm screws located at the top of the circuit board.
Unscrewing the screws allows for access to the speaker.

There are two 10mm screws located at the top of the circuit board.

Unscrewing the screws allows for access to the speaker.

Step 7

Flipping the circuit board will expose the speaker rested in the white LCD base.
Gently using the scoop end of the spudger will free the speaker from the dock.
Careful not to jerk the speaker as it is still attached to the board.

Flipping the circuit board will expose the speaker rested in the white LCD base.

Gently using the scoop end of the spudger will free the speaker from the dock.

Careful not to jerk the speaker as it is still attached to the board.

Step 8

The last portion of this will require soldering skills. Simply solder the speaker from the board and replace with desired speaker.
If this is your first time soldering, check out this useful soldering guide.

The last portion of this will require soldering skills. Simply solder the speaker from the board and replace with desired speaker.

If this is your first time soldering, check out this useful soldering guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Charles montes

Member since: 10/20/2016

513 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 5-5, Martin Fall 2016                        

                                                  Member of UMass Dartmouth, Team 5-5, Martin Fall 2016 



                    UMASSD-MARTIN-F16S5G5                     


                                            3 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team