Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

1

  • Screen
  • 7 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackVTechCS6719-16

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Slide the back cover off the cause.

Slide the back cover off the cause.

1024

Step 2

  • Lift the battery.
  • Unplug the two pin cable from the connector.

Lift the battery.

Unplug the two pin cable from the connector.

Step 3

  • Unscrew the two 10mm screws in phone base.

Unscrew the two 10mm screws in phone base.

Step 4

  • Using the metal spudger gently, but firmly edge along the device .
  • When you feel a hook or latch use a firm but gentle lifting motion upward to unlatch the front and back case.

Using the metal spudger gently, but firmly edge along the device .

When you feel a hook or latch use a firm but gentle lifting motion upward to unlatch the front and back case.

Step 5

  • Unscrew a second set of 10mm screws to access to the other side.

Unscrew a second set of 10mm screws to access to the other side.

Step 6

  • The front case is now free and able to be manipulated.
  • Set aside the circuit board and back case as they will get in the way.

The front case is now free and able to be manipulated.

Set aside the circuit board and back case as they will get in the way.

Step 7

  • Using a single finger apply a light force on the screen cover to release from the case.
  • Now the old screen can be replaced with a new desired one, simply properly align and it will clip into place.

Using a single finger apply a light force on the screen cover to release from the case.

Now the old screen can be replaced with a new desired one, simply properly align and it will clip into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Charles montes

Member since: 10/20/2016

513 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 5-5, Martin Fall 2016                        

                                                  Member of UMass Dartmouth, Team 5-5, Martin Fall 2016 



                    UMASSD-MARTIN-F16S5G5                     


                                            3 Members                     


                                            10 Guides authored