Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

1

  • Buttons
  • 7 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackVTechCS6719-16

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Buttons
  • Remove the sliding back cover from case.

Remove the sliding back cover from case.

1024

Step 2

  • lift the battery and unplug the two pin cable from phone base.

lift the battery and unplug the two pin cable from phone base.

Step 3

  • Remove the two 10mm screws at the base of the phone .

Remove the two 10mm screws at the base of the phone .

Step 4

  • Use the spudger along the edge using a firm but gentle lifting motion.
  • When doing this feel for the hooks that latch the phones front and back cases.

Use the spudger along the edge using a firm but gentle lifting motion.

When doing this feel for the hooks that latch the phones front and back cases.

Step 5

  • Unscrew a second set of 10mm screws to obtain access to the other side.

Unscrew a second set of 10mm screws to obtain access to the other side.

Step 6

  • The front of the phone can now be placed to the side
  • You will notice the button covers, these display the numerical values and positions of each button
  • These can be placed aside as they will get in the way later.

The front of the phone can now be placed to the side

You will notice the button covers, these display the numerical values and positions of each button

These can be placed aside as they will get in the way later.

Step 7

  • Now the silicon pads for the phone buttons are exposed.
  • These can easily be removed by pulling away the pads from the circuit board.
  • To replace simply align the new pad onto the button positions.

Now the silicon pads for the phone buttons are exposed.

These can easily be removed by pulling away the pads from the circuit board.

To replace simply align the new pad onto the button positions.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Charles montes

Member since: 10/20/2016

513 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 5-5, Martin Fall 2016                        

                                                  Member of UMass Dartmouth, Team 5-5, Martin Fall 2016 



                    UMASSD-MARTIN-F16S5G5                     


                                            3 Members                     


                                            10 Guides authored