Vtech Safe And Sound Dm221 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

• Speaker
• 9 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackVTech Safe And Sound DM221

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speaker               

• Remove the battery cover.

Remove the battery cover.

1024

Step 2

• Unplug the battery from its connector and remove.

Unplug the battery from its connector and remove.

Step 3

• Using the Phillips #00 screwdriver, unscrew the two 5.0 mm Phillips #00 screws at the bottom of the monitor.

Using the Phillips #00 screwdriver, unscrew the two 5.0 mm Phillips #00 screws at the bottom of the monitor.

Step 4

• Separate the back half of the device from the front using the metal spudger.

Separate the back half of the device from the front using the metal spudger.

Step 5

• Remove the two 5.0 mm Phillips #00 screws at the top of the device which holds the antenna at the top of the motherboard.
• This will allow the removal of the silver handle.

Remove the two 5.0 mm Phillips #00 screws at the top of the device which holds the antenna at the top of the motherboard.

This will allow the removal of the silver handle.

Step 6

• Remove the “TALK” button to get access to remove the motherboard.

Remove the “TALK” button to get access to remove the motherboard.

Step 7

• Push down on the antenna, located on the top of the motherboard.

Push down on the antenna, located on the top of the motherboard.

Step 8

• Gently remove the motherboard away from the monitor.
• Be careful not to disconnect the red wire.

Gently remove the motherboard away from the monitor.

Be careful not to disconnect the red wire.

Step 9

• Use the plastic spudger to push the two white plastic tabs, at the bottom of the device, up to release the metal retaining clip.

Use the plastic spudger to push the two white plastic tabs, at the bottom of the device, up to release the metal retaining clip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Krystal                     

Member since: 10/01/2015

567 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 1-5, Leahy Fall 2015                        

                                                  Member of USF Tampa, Team 1-5, Leahy Fall 2015 



                    USFT-LEAHY-F15S1G5                     


                                            4 Members                     


                                            5 Guides authored