Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

3

  • Case
  • 3 steps
  • Disassembling VTech MobiGo Touch Learning System Screen Enclosure
  • 4 steps
  • Buttons
  • 2 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackVTech MobiGo Touch Learning System

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case
  • Remove the battery covers and the four batteries.

Remove the battery covers and the four batteries.

1024

Step 2

  • Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.
  • Remove the eight 6.0 mm JIS #0 case screws.

Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.

Remove the eight 6.0 mm JIS #0 case screws.

Step 3

  • Using a plastic opening tool, separate the two pieces of the case carefully.

Using a plastic opening tool, separate the two pieces of the case carefully.

Step 4

              Disassembling VTech MobiGo Touch Learning System Screen Enclosure
  • Remove the three 4.0 mm Philips J0 screws holding the “L” shaped brackets in place.

Remove the three 4.0 mm Philips J0 screws holding the “L” shaped brackets in place.

Step 5

  • Remove the three “L” shaped brackets and the spring.

Remove the three “L” shaped brackets and the spring.

Step 6

  • Flip the device over and remove the three 4.0 mm Philips J0 case screws.

Flip the device over and remove the three 4.0 mm Philips J0 case screws.

Step 7

  • Separate the front and back of the case.
  • Use a plastic opening tool if necessary.

Separate the front and back of the case.

Use a plastic opening tool if necessary.

Step 8

              Buttons
  • Remove 6 (3.8 mm Philips J0) screws holding the buttons in.

Remove 6 (3.8 mm Philips J0) screws holding the buttons in.

Step 9

  • From here you can remove and replace the buttons.

From here you can remove and replace the buttons.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Daniel Kresge

Member since: 09/01/2015

385 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 8-3, Eyestone Fall 2015                        

                                                  Member of USF Tampa, Team 8-3, Eyestone Fall 2015 



                    USFT-EYESTONE-F15S8G3                     


                                            3 Members                     


                                            16 Guides authored