Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes

Sections

1

  • Speaker
  • 6 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackVTech Learning Tunes Karaoke

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • To remove the battery door, loosen the screw using a Flathead screwdriver.
  • A coin can also be used to loosen the screw.

To remove the battery door, loosen the screw using a Flathead screwdriver.

A coin can also be used to loosen the screw.

1024

Step 2

  • Remove the battery door and take out the batteries.

Remove the battery door and take out the batteries.

Step 3

  • Remove the six 9.5 mm Phillips #2 screws.
  • Remove the six 6.0 mm Phillips #2 screws.

Remove the six 9.5 mm Phillips #2 screws.

Remove the six 6.0 mm Phillips #2 screws.

Step 4

  • Gently pull up on the rear panel.
  • Be careful to not pull on the wire connections.
  • Carefully place the back panel underneath the top panel with the tops facing each other, as shown in the picture.

Gently pull up on the rear panel.

Be careful to not pull on the wire connections.

Carefully place the back panel underneath the top panel with the tops facing each other, as shown in the picture.

Step 5

  • Remove two 7.9 mm Phillips #1 screws on the speaker cover.
  • After removing the screws, remove the black plastic speaker cover to expose the speaker.

Remove two 7.9 mm Phillips #1 screws on the speaker cover.

After removing the screws, remove the black plastic speaker cover to expose the speaker.

Step 6

  • Desolder the speaker at the solder points to remove.
  • Learn more about soldering and desoldering connections here.

Desolder the speaker at the solder points to remove.

Learn more about soldering and desoldering connections here.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Gamuchirai Chifamba

Member since: 02/09/2016

249 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 7-2, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 7-2, Cheng Spring 2016 



                    USFT-CHENG-S16S7G2                     


                                            4 Members                     


                                            5 Guides authored