Difficulty
Easy
Steps
4
Time Required
7 minutes
Sections
1
- Front Case
- 4 steps
Flags
0
BackVTech Kidizoom Camera Connect
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Case
- Remove batteries and SD card before beginning disassembly!
- Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.
Remove batteries and SD card before beginning disassembly!
Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.
1024
Step 2
- Remove all four (11mm) screws with the Philips #0 screwdriver.
Remove all four (11mm) screws with the Philips #0 screwdriver.
Step 3
- Remove the two battery cartridges located on the underside of the camera.
- Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.
Remove the two battery cartridges located on the underside of the camera.
Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.
Step 4
- Beware of the two black viewfinder lens falling out as you pry open the device!
- The device should now be open and ready for further repair and/or replacement parts.
Beware of the two black viewfinder lens falling out as you pry open the device!
The device should now be open and ready for further repair and/or replacement parts.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Nick Foster
Member since: 02/14/2016
276 Reputation
1 Guide authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 6-4, Eyestone Spring 2016
Member of USF Tampa, Team 6-4, Eyestone Spring 2016
USFT-EYESTONE-S16S6G4
4 Members
5 Guides authored
