Vtech Innotab Max Camera Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 15 minutes

Sections

Cover
4 steps
Camera
3 steps

Flags

BackVTech InnoTab Max
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Cover

Remove all screw caps from the back panel using a metal spudger.

Remove all screw caps from the back panel using a metal spudger.

1024

Step 2

Next remove all of the now uncovered screws.
If there is a cartridge in the device make sure to remove it.

Next remove all of the now uncovered screws.

If there is a cartridge in the device make sure to remove it.

Step 3

Now that all of the screws have been removed, pry the back cover off using a plastic opening tool.

Now that all of the screws have been removed, pry the back cover off using a plastic opening tool.

Step 4

Here you can see the back cover has been fully removed and you can now access the front cover.
To remove the front cover, remove the springs holding the pictured brackets in place, then pull it away.

Here you can see the back cover has been fully removed and you can now access the front cover.

To remove the front cover, remove the springs holding the pictured brackets in place, then pull it away.

Step 5

              Camera

The camera is not held down by anything, so simply remove it from it’s spot to prepare for unplugging it.

The camera is not held down by anything, so simply remove it from it’s spot to prepare for unplugging it.

Step 6

Carefully remove the wire connecting the camera to the motherboard, using a tool to grip it if needed.
Be careful to only pull from the end of the connector (closest to the motherboard), as the strip is easy to tear.

Carefully remove the wire connecting the camera to the motherboard, using a tool to grip it if needed.

Be careful to only pull from the end of the connector (closest to the motherboard), as the strip is easy to tear.

Step 7

The camera is now removed completely removed from the device.

The camera is now removed completely removed from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Jacob Schioppo

Member since: 02/15/2017

533 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team S5-G5, Lacy Spring 2017                        

                                                  Member of USF Tampa, Team S5-G5, Lacy Spring 2017 



                    USFT-LACY-S17S5G5                     


                                            3 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team