Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • Rear Panel
  • 4 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackVtech InnoTab 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Panel               
  • Slide the battery compartment door lock down.
  • While still holding the battery compartment lock down, slide the two battery doors outwards on either side of the device.
  • Carefully remove the batteries from the battery compartment.
  • The standard option for the InnoTab 3 is four AA batteries. Vtech also offers a rechargeable battery online, but both battery options are removed from the device the same way.

Slide the battery compartment door lock down.

While still holding the battery compartment lock down, slide the two battery doors outwards on either side of the device.

Carefully remove the batteries from the battery compartment.

The standard option for the InnoTab 3 is four AA batteries. Vtech also offers a rechargeable battery online, but both battery options are removed from the device the same way.

1024

Step 2

  • Remove the six 7.6mm screws found in the battery compartment using a PH00 screwdriver.

Remove the six 7.6mm screws found in the battery compartment using a PH00 screwdriver.

Step 3

  • There are three hidden screws on the back of the device, two at the top and one near the bottom.
  • Using a nylon or metal spudger, remove the three caps that hide the screws.
  • Remove the 5mm screw near the bottom and the two 7.6mm at the top using a PH00 screwdriver.

There are three hidden screws on the back of the device, two at the top and one near the bottom.

Using a nylon or metal spudger, remove the three caps that hide the screws.

Remove the 5mm screw near the bottom and the two 7.6mm at the top using a PH00 screwdriver.

Step 4

  • Carefully separate the back panel from the front panel revealing the motherboard connected to the front panel.

Carefully separate the back panel from the front panel revealing the motherboard connected to the front panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Brooke Livingston                     

Member since: 03/11/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Colorado Springs, Team 5-4, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 5-4, Panko Spring 2015 



                    UCCS-PANKO-S15S5G4                     


                                            3 Members                     


                                            10 Guides authored