Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Rear Panel
  • 4 steps
  • Headphone Port
  • 2 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackVtech InnoTab 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

  • Before you begin disassembling the Vtech InnoTab 3, turn on your soldering iron. If working with others let them know that the soldering iron is on and to use caution.

What you need

Step 1

              Rear Panel               
  • Slide the battery compartment door lock down.
  • While still holding the battery compartment lock down, slide the two battery doors outwards on either side of the device.
  • Carefully remove the batteries from the battery compartment.
  • The standard option for the InnoTab 3 is four AA batteries. Vtech also offers a rechargeable battery online, but both battery options are removed from the device the same way.

Slide the battery compartment door lock down.

While still holding the battery compartment lock down, slide the two battery doors outwards on either side of the device.

Carefully remove the batteries from the battery compartment.

The standard option for the InnoTab 3 is four AA batteries. Vtech also offers a rechargeable battery online, but both battery options are removed from the device the same way.

1024

Step 2

  • Remove the six 7.6mm screws found in the battery compartment using a PH00 screwdriver.

Remove the six 7.6mm screws found in the battery compartment using a PH00 screwdriver.

Step 3

  • There are three hidden screws on the back of the device, two at the top and one near the bottom.
  • Using a nylon or metal spudger, remove the three caps that hide the screws.
  • Remove the 5mm screw near the bottom and the two 7.6mm at the top using a PH00 screwdriver.

There are three hidden screws on the back of the device, two at the top and one near the bottom.

Using a nylon or metal spudger, remove the three caps that hide the screws.

Remove the 5mm screw near the bottom and the two 7.6mm at the top using a PH00 screwdriver.

Step 4

  • Carefully separate the back panel from the front panel revealing the motherboard connected to the front panel.

Carefully separate the back panel from the front panel revealing the motherboard connected to the front panel.

Step 5

              Headphone Port               
  • On the front panel of the device, the headphone poet is located at the bottom right corner of the device, opposte of the speaker.
  • Using tweezers, lift up to remove the headphone port from its holding.
  • Be careful not to tug too hard when removing the headphone port for you may disconnect the wires from the solder

On the front panel of the device, the headphone poet is located at the bottom right corner of the device, opposte of the speaker.

Using tweezers, lift up to remove the headphone port from its holding.

Be careful not to tug too hard when removing the headphone port for you may disconnect the wires from the solder

Step 6

  • Use tweezers to hold the four connecting wires away from the headphone port.
  • Desolder the four wires connected to the headphone port.
  • This is a tricky step. Refer to this guide to learn how to solder: How To Solder and Desolder Connections

Use tweezers to hold the four connecting wires away from the headphone port.

Desolder the four wires connected to the headphone port.

This is a tricky step. Refer to this guide to learn how to solder: How To Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Zach Diviney                     

Member since: 03/11/2015

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Colorado Springs, Team 5-4, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 5-4, Panko Spring 2015 



                    UCCS-PANKO-S15S5G4                     


                                            3 Members                     


                                            10 Guides authored