Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Vtech Emil the Panda
- 5 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackToy
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Emil is a talking baby-laptop which works with cards, that have holes which trigger the programs.
When the spring sensors are oxidized, the cards can’t work and the programs don’t start.
So you must deoxidize the contacts at the springs.
What you need
Step 1
Vtech Emil the Panda
- First you must detach thes round yellow plugs which cover the screws.
- There are 6 short screws around the “display”
- …and two longer screws under that “display”
First you must detach thes round yellow plugs which cover the screws.
There are 6 short screws around the “display”
…and two longer screws under that “display”
1024
Step 2
- Here a view of these screws
Here a view of these screws
Step 3
- Now just pull it to open.
- Down there is a spring and a plastic part, look at the pictures
Now just pull it to open.
Down there is a spring and a plastic part, look at the pictures
Step 4
- There you have these contact springs.
There you have these contact springs.
Step 5
- The springs are deoxidized with a electronics-cleaner-spray.
- After reassembling, Emil nnow knows every card and can talk and sing.
- Done. :)
The springs are deoxidized with a electronics-cleaner-spray.
After reassembling, Emil nnow knows every card and can talk and sing.
Done. :)
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Schwarzstein
Member since: 07/15/2013
2,741 Reputation
13 Guides authored
Badges:
21
+18 more badges