Difficulty
Easy
Steps
3
Time Required
Suggest a time??
Sections
2
- Grill Cover
- 2 steps
- Fan Blades
- 1 step
Flags
0
BackVornado 133
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Grill Cover
- Use a #1 Phillips screwdriver to remove the four 3mm screws.
- It may be difficult to reach the bottom two screws; tilt the fan housing straight upwards for easier access.
Use a #1 Phillips screwdriver to remove the four 3mm screws.
It may be difficult to reach the bottom two screws; tilt the fan housing straight upwards for easier access.
1024
Step 2
- Once the screws are removed, turn the fan back over. Use your hands to pull the front grill cover off.
Once the screws are removed, turn the fan back over. Use your hands to pull the front grill cover off.
Step 3
Fan Blades
- Turn the center nut on the blade shaft clockwise to remove the nut, then remove the blades.
- The nut is removed by turning clockwise, rather than the normal counterclockwise.
Turn the center nut on the blade shaft clockwise to remove the nut, then remove the blades.
The nut is removed by turning clockwise, rather than the normal counterclockwise.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Erin Klein
Member since: 07/06/2017
453 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
UW Tacoma, Team S1-G2, Liner Summer 2017
Member of UW Tacoma, Team S1-G2, Liner Summer 2017
UWT-LINER-SU17S1G2
4 Members
4 Guides authored
