Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
1
- Volume Fix for Zillionz Savings Goal ATM Bank
- 5 steps
Flags
0
BackZillionz Savings Goal ATM Bank
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Phillips Screw
- Unscrew the 6 phillips screws on the left and right side of the machine with a 603-3 IN. 1PT phillips screwdriver.
- CAUTION: Use caution while opening the machine, wires will be attached to both sides. Place screws on the Magnetic Mat to avoid misplacing them.
Unscrew the 6 phillips screws on the left and right side of the machine with a 603-3 IN. 1PT phillips screwdriver.
CAUTION: Use caution while opening the machine, wires will be attached to both sides. Place screws on the Magnetic Mat to avoid misplacing them.
1024
Step 2
Speaker Identification
- The Zillionz ATM Machine Speaker is placed on the upper left of the machine. The speaker is a circular green shape with a thin purple cover holding the speaker in place. There will be two yellow wires connecting the speaker to the circuit board.
The Zillionz ATM Machine Speaker is placed on the upper left of the machine. The speaker is a circular green shape with a thin purple cover holding the speaker in place. There will be two yellow wires connecting the speaker to the circuit board.
Step 3
Speaker Teardown
- Using the ifixit screwdriver with phillips head J1, unscrew the two screws located on the ends of the purple piece covering the speaker. Place screws onto Magnetic Mat.
Using the ifixit screwdriver with phillips head J1, unscrew the two screws located on the ends of the purple piece covering the speaker. Place screws onto Magnetic Mat.
Step 4
Put Felt Pads on Speaker
- Place the sticky side of the felt pad directly in the center of the clear plastic covering on speaker. Place another felt pad directly on top of the felt pad that was just placed on the speaker.
Place the sticky side of the felt pad directly in the center of the clear plastic covering on speaker. Place another felt pad directly on top of the felt pad that was just placed on the speaker.
Step 5
Reassemble
- To reassemble this device, follow these instructions backwards.
To reassemble this device, follow these instructions backwards.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Attached Documents
- Zillionz-ATM-Troubleshooting-.pdf
- PDF - 47.67 kb
- View
Zillionz-ATM-Troubleshooting-.pdf
PDF - 47.67 kb
Author
with 5 other contributors
Danielle Harrington
Member since: 12/10/2015
122 Reputation
1 Guide authored
Badges:
4
+1 more badge