Difficulty

Moderate

Steps

7

Time Required

                          30 minutes

Sections

2

  • Back Cover
  • 3 steps
  • Power Button
  • 4 steps

Flags

0

  • BackVizio SmartCast Tablet Remote XR6P

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Obtain the black plastic spudger tool from the iFixit toolkit. Position the device as shown in the picture. Insert the flat end of the spudger directly in the space above the power button between the back cover and front screen.

Obtain the black plastic spudger tool from the iFixit toolkit. Position the device as shown in the picture. Insert the flat end of the spudger directly in the space above the power button between the back cover and front screen.

1024

Step 2

  • Gently pry up on the plate with the spudger. You may hear some cracking noises as you work the spudger around your device, this is normal.

Gently pry up on the plate with the spudger. You may hear some cracking noises as you work the spudger around your device, this is normal.

Step 3

  • Pry around the edges of the tablet with your fingers until you have successfully removed the back of the device.

Pry around the edges of the tablet with your fingers until you have successfully removed the back of the device.

Step 4

              Power Button
  • Using the pointy end of the black plastic spudger, carefully remove the black tape covering the plug.

Using the pointy end of the black plastic spudger, carefully remove the black tape covering the plug.

Step 5

  • Use the flat end of the spudger to pry the ribbon holder upwards.

Use the flat end of the spudger to pry the ribbon holder upwards.

Step 6

  • Obtain the tweezers and gently pull the black ribbon until it comes out of the holder.

Obtain the tweezers and gently pull the black ribbon until it comes out of the holder.

Step 7

  • Continue pulling the black tab until you have completely removed the power button from the device.

Continue pulling the black tab until you have completely removed the power button from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Wilmer Arriaga

Member since: 10/04/2018

159 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Linn Benton Community College, Team S2-G5, Karnes Fall 2018                        

                                                  Member of Linn Benton Community College, Team S2-G5, Karnes Fall 2018 



                    LBCC-KARNES-F18S2G5                     


                                            3 Members                     


                                            12 Guides authored

miguel anhel Hernandez - Mar 26, 2021

Reply

you can perform the operation since when you shake the tablet listening that something moves in the area of ​​the power button, the tablet does not turn on by pressing the button, I have to connect the charger and now press the button and the tablet turns on, already on the device pressed power button and the menu appears shutdown and reboot, actually I don’t know what the problem is.