Vizio Smartcast Tablet Remote Xr6P Micro Usb Charging Port Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Back Cover
3 steps
Micro USB Charging Port
4 steps

Flags

BackVizio SmartCast Tablet Remote XR6P
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Obtain the black plastic spudger tool from the iFixit toolkit. Position the device as shown in the picture. Insert the flat end of the spudger directly in the space above the power button between the back cover and front screen.

Obtain the black plastic spudger tool from the iFixit toolkit. Position the device as shown in the picture. Insert the flat end of the spudger directly in the space above the power button between the back cover and front screen.

1024

Step 2

Gently pry up on the plate with the spudger. You may hear some cracking noises as you work the spudger around your device, this is normal.

Gently pry up on the plate with the spudger. You may hear some cracking noises as you work the spudger around your device, this is normal.

Step 3

Pry around the edges of the tablet with your fingers until you have successfully removed the back of the device.

Pry around the edges of the tablet with your fingers until you have successfully removed the back of the device.

Step 4

              Micro USB Charging Port

The black ribbon can be easily damaged during this step, so proceed with caution.
Place the flat end of the black plastic spudger under the black plug and pry up to release the black ribbon. Using the metal tweezers, pull the black ribbon out of the plug.

The black ribbon can be easily damaged during this step, so proceed with caution.

Place the flat end of the black plastic spudger under the black plug and pry up to release the black ribbon. Using the metal tweezers, pull the black ribbon out of the plug.

Step 5

Remove all three 3mm-long silver screws using the T5 Torx screwdriver.

Remove all three 3mm-long silver screws using the T5 Torx screwdriver.

Step 6

Place the shovel end of the metal spudger under the speaker and pry upwards to remove the speaker from the device.
The speaker is secured to the device with adhesive glue so you may hear cracking noises while prying with the spudger.

Place the shovel end of the metal spudger under the speaker and pry upwards to remove the speaker from the device.

The speaker is secured to the device with adhesive glue so you may hear cracking noises while prying with the spudger.

Step 7

Using the tweezers, grab a hold of the Micro USB assembly and gently remove it from the device.

Using the tweezers, grab a hold of the Micro USB assembly and gently remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Jordan Adams

Member since: 10/04/2018

445 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Linn Benton Community College, Team S2-G5, Karnes Fall 2018                        

                                                  Member of Linn Benton Community College, Team S2-G5, Karnes Fall 2018 



                    LBCC-KARNES-F18S2G5                     


                                            3 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team