Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackVizio SmartCast Tablet Remote XR6M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold the device in one hand with the screen facing down.
- Insert the plastic opening tool under the back panel on the side of the device.
- Slide the plastic opening tool down the side of the device, then repeat this process on all four sides of the device until the back panel pops off.
- You may hear a popping noise when you pry off the back panel.
Hold the device in one hand with the screen facing down.
Insert the plastic opening tool under the back panel on the side of the device.
Slide the plastic opening tool down the side of the device, then repeat this process on all four sides of the device until the back panel pops off.
You may hear a popping noise when you pry off the back panel.
1024
Step 2
- Use a driver with the T5 bit to remove the 3mm screws attaching the narrow metal plate to the main board.
Use a driver with the T5 bit to remove the 3mm screws attaching the narrow metal plate to the main board.
Step 3
- Slide the pointy end of the nylon spudger under the wires of the battery connector, and gently lift the wires away from the device, freeing the connector from the main board.
Slide the pointy end of the nylon spudger under the wires of the battery connector, and gently lift the wires away from the device, freeing the connector from the main board.
Step 4
- To remove adhesive, insert the flat end of the plastic spudger under the battery. Slide it toward the top of the device until the battery pops free.
- You may hear a popping noise when you pry off the battery.
To remove adhesive, insert the flat end of the plastic spudger under the battery. Slide it toward the top of the device until the battery pops free.
You may hear a popping noise when you pry off the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 4 other contributors
tate campbell
Member since: 09/17/2018
439 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Washington State, Team S2-G3, Hope Fall 2018
Member of Washington State, Team S2-G3, Hope Fall 2018
WSU-HOPE-F18S2G3
4 Members
3 Guides authored
John - May 20, 2019
Reply
Where did you find the replacement battery? I’ve looked everywhere, but the part numbers bring up nothing.
gary goodnight - Dec 6, 2020
Reply
Same as that guy ^^^