Difficulty
Moderate
Steps
7
Time Required
3 minutes
Sections
1
- “Ok” button
- 7 steps
Flags
0
BackVizio Smart T.V. Remote Control
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
"Ok" button
- Open the back cover with the direction of the arrow.
Open the back cover with the direction of the arrow.
1024
Step 2
- Remove the two batteries.
Remove the two batteries.
Step 3
- Use the plastic opening tool to unlock the device. Place the tool in the thin space that separates the base from the control panel.
Use the plastic opening tool to unlock the device. Place the tool in the thin space that separates the base from the control panel.
Step 4
- Move the opening tool between the two sides to lift the base up slightly.
- Continue on the other side of the remote.
Move the opening tool between the two sides to lift the base up slightly.
Continue on the other side of the remote.
Step 5
- Remove the rubber buttons pad.
Remove the rubber buttons pad.
Step 6
- Remove the arrows pad from the plastic cover.
Remove the arrows pad from the plastic cover.
Step 7
- Place the “ok” button in the middle of the arrow pad.
Place the “ok” button in the middle of the arrow pad.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Ghalib Alqahtani
Member since: 09/22/2019
172 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Embry-Riddle Aeronautical University, Team S1-G120, Watkins Fall 2019
Member of Embry-Riddle Aeronautical University, Team S1-G120, Watkins Fall 2019
ERAU-WATKINS-F19S1G120
1 Member
1 Guide authored
