Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

3

  • Dome Cover
  • 2 steps
  • Camera Module
  • 5 steps
  • Motherboard
  • 2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackVivotek FD8169

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Dome Cover
  • Loosen the outside screw.

Loosen the outside screw.

1024

Step 2

  • Press down on the side button, and lift up the top dome.

Press down on the side button, and lift up the top dome.

Step 3

              Camera Module
  • Remove three screws that connect the camera base to the motherboard using a Phillips #1 screwdriver.

Remove three screws that connect the camera base to the motherboard using a Phillips #1 screwdriver.

Step 4

  • Lift off the camera base from the motherboard.

Lift off the camera base from the motherboard.

Step 5

  • Unscrew the cord from the motherboard.
  • Unplug the remaining connection.

Unscrew the cord from the motherboard.

Unplug the remaining connection.

Step 6

  • Unscrew the camera from the camera base with a hex screwdriver on both sides.

Unscrew the camera from the camera base with a hex screwdriver on both sides.

Step 7

  • Pull the camera out from the camera base.

Pull the camera out from the camera base.

Step 8

              Motherboard
  • Once the camera module is removed, unscrew the two remaining screws which attach the motherboard to the backplate.

Once the camera module is removed, unscrew the two remaining screws which attach the motherboard to the backplate.

Step 9

  • Once the screws are gone, lift the faulty motherboard and replace with a new one.

Once the screws are gone, lift the faulty motherboard and replace with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Artem Dudko

Member since: 10/18/2021

135 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team 1-6, Simcock Fall 2021                        

                                                  Member of UMass Dartmouth, Team 1-6, Simcock Fall 2021 



                    UMASSD-SIMCOCK-F21S1G6                     


                                            4 Members                     


                                            4 Guides authored