Difficulty
Moderate
Steps
7
Time Required
5 - 10 minutes
Sections
2
- Dome Cover
- 2 steps
- Camera Module
- 5 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackVivotek FD8169
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Dome Cover
- Loosen the outside screw.
Loosen the outside screw.
1024
Step 2
- Press down on the side button, and lift up the top dome.
Press down on the side button, and lift up the top dome.
Step 3
Camera Module
- Remove three screws that connect the camera base to the motherboard using a Phillips #1 screwdriver.
Remove three screws that connect the camera base to the motherboard using a Phillips #1 screwdriver.
Step 4
- Lift off the camera base from the motherboard.
Lift off the camera base from the motherboard.
Step 5
- Unscrew the cord from the motherboard.
- Unplug the remaining connection.
Unscrew the cord from the motherboard.
Unplug the remaining connection.
Step 6
- Unscrew the camera from the camera base with a hex screwdriver on both sides.
Unscrew the camera from the camera base with a hex screwdriver on both sides.
Step 7
- Pull the camera out from the camera base.
Pull the camera out from the camera base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Logan Bento
Member since: 10/18/2021
121 Reputation
1 Guide authored
Badges:
2
Team
UMass Dartmouth, Team 1-6, Simcock Fall 2021
Member of UMass Dartmouth, Team 1-6, Simcock Fall 2021
UMASSD-SIMCOCK-F21S1G6
4 Members
4 Guides authored
