Difficulty
Moderate
Steps
16
Time Required
8 - 10 minutes
Sections
5
- Back Cover
- 3 steps
- Battery
- 3 steps
- Speaker
- 2 steps
- Camera
- 3 steps
- Motherboard
- 5 steps
Flags
0
BackVivitar XO 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the two 3mm Phillips #00 screws on the bottom of the tablet.
Remove the two 3mm Phillips #00 screws on the bottom of the tablet.
1024
Step 2
- With the plastic opening tools, pry open the back cover.
With the plastic opening tools, pry open the back cover.
Step 3
- Remove the back cover from the tablet.
Remove the back cover from the tablet.
Step 4
Battery
- Peel off the black pieces of tape from the internal components.
Peel off the black pieces of tape from the internal components.
Step 5
- Carefully remove the battery from the tablet.
Carefully remove the battery from the tablet.
Step 6
- With the tweezers, firmly grab the wire at the base and pull to disconnect the battery from the motherboard.
With the tweezers, firmly grab the wire at the base and pull to disconnect the battery from the motherboard.
Step 7
Speaker
- Carefully remove the speaker from the metal plate with your hands.
Carefully remove the speaker from the metal plate with your hands.
Step 8
- With tweezers, firmly grab the wire at the base and pull to disconnect the speaker from the motherboard.
With tweezers, firmly grab the wire at the base and pull to disconnect the speaker from the motherboard.
Step 9
Camera
- Peel off black tape that is holding the camera in place.
Peel off black tape that is holding the camera in place.
Step 10
- Carefully disconnect the ribbon cables from the motherboard.
Carefully disconnect the ribbon cables from the motherboard.
Step 11
- Using the tweezers, firmly grab wires and pull to disconnect them from the motherboard.
Using the tweezers, firmly grab wires and pull to disconnect them from the motherboard.
Step 12
Motherboard
- Disconnect the large golden ribbon cable that is connected to the digitizer. Firmly grab the cable close to the connection and pull to disconnect.
Disconnect the large golden ribbon cable that is connected to the digitizer. Firmly grab the cable close to the connection and pull to disconnect.
Step 13
- Remove four 4mm PH00 silver screws from the motherboard.
Remove four 4mm PH00 silver screws from the motherboard.
Step 14
- Remove two 2mm PH00 black screws from the motherboard.
Remove two 2mm PH00 black screws from the motherboard.
Step 15
- Carefully remove the silver cover from the motherboard.
Carefully remove the silver cover from the motherboard.
Step 16
- Gently pick up and turn over the motherboard. While turned over, disconnect the last ribbon cable that connects to screen.
Gently pick up and turn over the motherboard. While turned over, disconnect the last ribbon cable that connects to screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
James Lunn
Member since: 01/20/2015
116 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 11-1, Blackwell Winter 2015
Member of USF Tampa, Team 11-1, Blackwell Winter 2015
USFT-BLACKWELL-W15S11G1
4 Members
10 Guides authored
