Difficulty
Easy
Steps
9
Time Required
5 - 8 minutes
Sections
3
- Back Cover
- 3 steps
- Battery
- 3 steps
- Camera
- 3 steps
Flags
0
BackVivitar XO 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the two 3mm Phillips #00 screws on the bottom of the tablet.
Remove the two 3mm Phillips #00 screws on the bottom of the tablet.
1024
Step 2
- With the plastic opening tools, pry open the back cover.
With the plastic opening tools, pry open the back cover.
Step 3
- Remove the back cover from the tablet.
Remove the back cover from the tablet.
Step 4
Battery
- Peel off the black pieces of tape from the internal components.
Peel off the black pieces of tape from the internal components.
Step 5
- Carefully remove the battery from the tablet.
Carefully remove the battery from the tablet.
Step 6
- With the tweezers, firmly grab the wire at the base and pull to disconnect the battery from the motherboard.
With the tweezers, firmly grab the wire at the base and pull to disconnect the battery from the motherboard.
Step 7
Camera
- Peel off black tape that is holding the camera in place.
Peel off black tape that is holding the camera in place.
Step 8
- Carefully disconnect the ribbon cables from the motherboard.
Carefully disconnect the ribbon cables from the motherboard.
Step 9
- Using the tweezers, firmly grab wires and pull to disconnect them from the motherboard.
Using the tweezers, firmly grab wires and pull to disconnect them from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Braanah Craig
Member since: 01/20/2015
374 Reputation
2 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 11-1, Blackwell Winter 2015
Member of USF Tampa, Team 11-1, Blackwell Winter 2015
USFT-BLACKWELL-W15S11G1
4 Members
10 Guides authored
