Difficulty
Moderate
Steps
6
Time Required
30 - 45 minutes
Sections
1
- Lens
- 6 steps
Flags
0
BackVivitar Vivicam T027
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lens
- Use a Phillips #00 screwdriver to remove the 3 mm screws at the sides of the camera.
Use a Phillips #00 screwdriver to remove the 3 mm screws at the sides of the camera.
1024
Step 2
- Remove sticker on top of camera as it covers a screw.
- There are 5 screws to remove in total on the sides of the camera.
Remove sticker on top of camera as it covers a screw.
There are 5 screws to remove in total on the sides of the camera.
Step 3
- Separate the front piece of the camera from the back, revealing the motherboard.
Separate the front piece of the camera from the back, revealing the motherboard.
Step 4
- Use a Phillips #000 screwdriver to remove the two 2.3 mm screws that surround the lens.
Use a Phillips #000 screwdriver to remove the two 2.3 mm screws that surround the lens.
Step 5
- Remove the two silver plates using tweezers.
Remove the two silver plates using tweezers.
Step 6
- Remove the black lens carefully with your fingers.
Remove the black lens carefully with your fingers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Nicole Knoebel
Member since: 03/11/2015
258 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
Marist, Team 15-13, Laflen Spring 2015
Member of Marist, Team 15-13, Laflen Spring 2015
MARS-LAFLEN-S15S15G13
4 Members
3 Guides authored
