Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Waterproof Case Lens Cover
- 5 steps
Flags
0
BackVivitar DVR 781HD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Waterproof Case Lens Cover
- Place waterproof case on flat surface, with the lens cover facing up.
Place waterproof case on flat surface, with the lens cover facing up.
1024
Step 2
- Remove the six 4.5mm Phillips #00 screws from the black lens cover trim.
Remove the six 4.5mm Phillips #00 screws from the black lens cover trim.
Step 3
- While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface.
While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface.
Step 4
- Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case.
Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case.
Step 5
- There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly.
There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Jordan Baum
Member since: 02/13/2016
352 Reputation
2 Guides authored
Badges:
17
+14 more badges
Team
IUPUI, Team 54-6, Wilson Spring 2016
Member of IUPUI, Team 54-6, Wilson Spring 2016
IUPUI-WILSON-S16S54G6
3 Members
10 Guides authored
Andrew Hinsley - Jun 27, 2016
Reply
Hello, do you know where I can acquire a replacement water proof case for my Vivitar DVR 787 HD action camcorder?
