Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

2

  • Front Case
  • 3 steps
  • Motherboard
  • 2 steps

Flags

0

  • BackVivitar DVR 781HD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Case
  • Begin with the camcorder lens up on a clear working surface.
  • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

Begin with the camcorder lens up on a clear working surface.

Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

1024

Step 2

  • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

Step 3

  • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.
  • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

Step 4

              Motherboard
  • Using a P1 screwdriver, remove the 4mm screws holding the motherboard into the case.

Using a P1 screwdriver, remove the 4mm screws holding the motherboard into the case.

Step 5

  • Gently lift the motherboard, handling it by the edges.

Gently lift the motherboard, handling it by the edges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Nathan McDaniel

Member since: 02/13/2016

564 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       IUPUI, Team 54-6, Wilson Spring 2016                        

                                                  Member of IUPUI, Team 54-6, Wilson Spring 2016 



                    IUPUI-WILSON-S16S54G6                     


                                            3 Members                     


                                            10 Guides authored

Heki Kahni - Aug 16, 2017

Reply

It says no parts required, but it is instructions to replace the motherboard.

There is nothing about getting another motherboard, and how much.

Rdam Russell - Mar 13, 2022

Reply

How do you get a motherboard?