Difficulty

Easy

Steps

3

Time Required

                          2 minutes            

Sections

1

  • Front Case
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackVivitar DVR 781HD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Front Case               
  • Begin with the camcorder lens up on a clear working surface.
  • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

Begin with the camcorder lens up on a clear working surface.

Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

1024

Step 2

  • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

Step 3

  • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.
  • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Jordan Baum                     

Member since: 02/13/2016

352 Reputation

                                      2 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges                           

Team

                       IUPUI, Team 54-6, Wilson Spring 2016                        

                                                  Member of IUPUI, Team 54-6, Wilson Spring 2016 



                    IUPUI-WILSON-S16S54G6                     


                                            3 Members                     


                                            10 Guides authored