Difficulty
Moderate
Steps
17
Time Required
30 - 40 minutes
Sections
1
- LCD Screen
- 17 steps
Flags
0
BackVisual Land Prestige Elite 7Q
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
At the bottom of the tablet, remove the two 3.6mm screws with a Phillips #000 screwdriver.
1024
Step 2
- Wedge a plastic opening tool into the edges of the tablet to pry it open.
Wedge a plastic opening tool into the edges of the tablet to pry it open.
Step 3
- Wedge a curved metal spudger to remove the speaker.
Wedge a curved metal spudger to remove the speaker.
Step 4
- Use a Phillips #000 screwdriver to remove the two 3.6mm screws.
Use a Phillips #000 screwdriver to remove the two 3.6mm screws.
Step 5
- Use a plastic opening tool to lift the black tab.
Use a plastic opening tool to lift the black tab.
Step 6
- Carefully remove the ribbon cable from the black tab.
Carefully remove the ribbon cable from the black tab.
Step 7
- Use a plastic opening tool to remove the camera.
Use a plastic opening tool to remove the camera.
Step 8
- Use a Phillips #000 screwdriver to remove the 3.6mm screw.
Use a Phillips #000 screwdriver to remove the 3.6mm screw.
Step 9
- Lift the tape holding down the battery.
Lift the tape holding down the battery.
Step 10
- Wedge a plastic card underneath the battery to remove it.
Wedge a plastic card underneath the battery to remove it.
Step 11
Step 12
Step 13
Step 14
- Lift to remove the battery and motherboard from the tablet.
Lift to remove the battery and motherboard from the tablet.
Step 15
- Lift the tape on the sides.
Lift the tape on the sides.
Step 16
- Use a Phillips #000 screwdriver to remove the three 2.5mm screws.
Use a Phillips #000 screwdriver to remove the three 2.5mm screws.
Step 17
- Be careful on this step - the screen is fragile and can break easily.
- Wedge a metal spudger underneath the LCD to remove it.
- Replace the LCD.
Be careful on this step - the screen is fragile and can break easily.
Wedge a metal spudger underneath the LCD to remove it.
Replace the LCD.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Sabrina Scholten
Member since: 09/22/2016
621 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
UC Davis, Team 2-1, Oliver Fall 2016
Member of UC Davis, Team 2-1, Oliver Fall 2016
UCD-OLIVER-F16S2G1
5 Members
12 Guides authored