Difficulty

Moderate

Steps

3

Time Required

                          25 minutes            

Sections

1

  • Back Panel
  • 3 steps

Flags

0

  • BackVisual Land Prestige 7L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Remove the two 8mm Phillips Head screws located at the bottom of your device.

Remove the two 8mm Phillips Head screws located at the bottom of your device.

1024

Step 2

  • Insert the spudger between the two pieces of the case around the media ports and pry them apart.
  • We found the best way to get the spudger inside the case was to insert in into the SD card slot. Be sure to only insert the spudger a shallow amount and be careful not to damage any of the inside of the device.
  • Finish unsnapping each plastic piece holding the device together along the bottom.

Insert the spudger between the two pieces of the case around the media ports and pry them apart.

We found the best way to get the spudger inside the case was to insert in into the SD card slot. Be sure to only insert the spudger a shallow amount and be careful not to damage any of the inside of the device.

Finish unsnapping each plastic piece holding the device together along the bottom.

Step 3

  • Move the spudger down the rest of the case, separating each side, and finally the top.
  • Pull the back off and place it to the side.
  • Without a back panel for protection, be sure place your device on the table screen-side down to avoid damaging the internal circuitry.

Move the spudger down the rest of the case, separating each side, and finally the top.

Pull the back off and place it to the side.

Without a back panel for protection, be sure place your device on the table screen-side down to avoid damaging the internal circuitry.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Robert                     

Member since: 01/28/2015

141 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Penn State, Team 2-25, Kaschak Winter 2015                        

                                                  Member of Penn State, Team 2-25, Kaschak Winter 2015 



                    PSU-KASCHAK-W15S2G25                     


                                            4 Members                     


                                            4 Guides authored