Visual Land Prestige 10 Front Facing Camera Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          25 - 45 minutes            

Sections

2

• Back Case
• 4 steps
• Front Facing Camera
• 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackVisual Land Prestige 10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Case               

• Remove the 3mm screws from bottom of tablet with the precision screwdriver and place on magnetic mat. label where they came from.
• All screws throughout this guide are the same 3mm size.

Remove the 3mm screws from bottom of tablet with the precision screwdriver and place on magnetic mat. label where they came from.

All screws throughout this guide are the same 3mm size.

1024

Step 2

• Using the spudger, create a small opening to be used to open the back case.
• While holding the case open, insert the plastic opening tool to get a larger opening.
• Once you have a slight opening, insert the spudger and work around the edges, separating the back plate from the front.

Using the spudger, create a small opening to be used to open the back case.

While holding the case open, insert the plastic opening tool to get a larger opening.

Once you have a slight opening, insert the spudger and work around the edges, separating the back plate from the front.

Step 3

• now that the case is open, carefully remove the speakers and set aside.

now that the case is open, carefully remove the speakers and set aside.

Step 4

• Gently remove the speakers from the back case with tweezers and set the case aside.

Gently remove the speakers from the back case with tweezers and set the case aside.

Step 5

              Front Facing Camera               

• Locate the Camera Housing. Gently grip and lift the small black tab until you feel an audible click.
• Gently remove the connector by pulling straight out, gripping the black connector head or as close as possible.
• Gently grip and pull up the front camera, covered by protective adhesive foam.
• Set aside the Camera housing.

Locate the Camera Housing. Gently grip and lift the small black tab until you feel an audible click.

Gently remove the connector by pulling straight out, gripping the black connector head or as close as possible.

Gently grip and pull up the front camera, covered by protective adhesive foam.

Set aside the Camera housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Connor Reese                     

Member since: 04/08/2015

1,244 Reputation

                                      6 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       Eastern Washington University, Team 2-1, Matresse Spring 2015                        

                                                  Member of Eastern Washington University, Team 2-1, Matresse Spring 2015 



                    EWU-MATRESSE-S15S2G1                     


                                            3 Members                     


                                            12 Guides authored