Difficulty
Moderate
Steps
10
Time Required
30 minutes - 1 hour
Sections
1
- Tuning Peg
- 10 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackViolin
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Loosen Peg
- Twist the top peg to loosen the violin string.
- Twist peg slowly clockwise to loosen string
Twist the top peg to loosen the violin string.
Twist peg slowly clockwise to loosen string
1024
Step 2
Unhook String
- Unhook the bottom end of the string from the fine tuners on the tailpiece.
Unhook the bottom end of the string from the fine tuners on the tailpiece.
Step 3
Remove peg
- Slowly untwist the peg in clockwise direction to remove the peg from the violin.
Slowly untwist the peg in clockwise direction to remove the peg from the violin.
Step 4
Sharpen peg
- Clean peg or grab a new peg.
- Use sharpener to size peg to the hole
- Be cautious when using the sharpener.
Clean peg or grab a new peg.
Use sharpener to size peg to the hole
Be cautious when using the sharpener.
Step 5
Remove string
- Carefully remove string from violin
Carefully remove string from violin
Step 6
Test size of peg
- Twist peg back into hole to test size.
- If too much resistance, then remove peg and resize with sharpener again.
Twist peg back into hole to test size.
If too much resistance, then remove peg and resize with sharpener again.
Step 7
Re-string peg
- Once peg is in place re-attach string to peg hole.
- Slowly rotate peg to have a better angle if trouble reattaching string occurs.
Once peg is in place re-attach string to peg hole.
Slowly rotate peg to have a better angle if trouble reattaching string occurs.
Step 8
Re-hook string
- Re-hook bottom of string to fine tuners.
Re-hook bottom of string to fine tuners.
Step 9
Tighten string
- Once the peg is inserted, you may begin to twist the peg in the counterclockwise direction while in the hole and tighten the string.
Once the peg is inserted, you may begin to twist the peg in the counterclockwise direction while in the hole and tighten the string.
Step 10
Retune violin
- Turn peg clockwise to create a higher pitch and counterclockwise to lower pitch.
- Using a tuning app if you are unsure if you are too high or low on the specific note.
Turn peg clockwise to create a higher pitch and counterclockwise to lower pitch.
Using a tuning app if you are unsure if you are too high or low on the specific note.
Be sure to tune all strings after replacing or resizing pegs.
Cancel: I did not complete this guide.
Author
with 1 other contributor
James
Member since: 11/22/2022
181 Reputation
1 Guide authored
Badges:
1