Versamed Ivent 201 Power Pack Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          20 minutes            

Sections

1

• Power Pack
• 5 steps

Flags

0

• BackVersaMed iVent 201

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Pack               

• Remove the four 3mm x 20mm Phillips screws located on the corners of the power pack.

Remove the four 3mm x 20mm Phillips screws located on the corners of the power pack.

1024

Step 2

• Pull the power pack from the compartment using black handle.

Pull the power pack from the compartment using black handle.

Step 3

• Remove the five 3mm x 10mm Phillips screws and washers from the back of the power pack. Lift off the cover after.

Remove the five 3mm x 10mm Phillips screws and washers from the back of the power pack. Lift off the cover after.

Step 4

• Turn the battery pack upside down and take the battery out of the casing.
• When reassembling, listen for the sound of the cooling fan for confirmation that the connection was successful.

Turn the battery pack upside down and take the battery out of the casing.

When reassembling, listen for the sound of the cooling fan for confirmation that the connection was successful.

Step 5

• Remove the two spade connectors using pliers.
• When assembling the power pack, MAKE SURE to connect the red wire to the positive terminal and the black wire to the negative terminal of the battery.

Remove the two spade connectors using pliers.

When assembling the power pack, MAKE SURE to connect the red wire to the positive terminal and the black wire to the negative terminal of the battery.

To reassemble your device, follow these instructions in reverse order. Caution: MAKE SURE THE RED WIRE IS CONNECTED TO THE POSITIVE TERMINAL AND THE BLACK WIRE IS CONNECTED TO THE NEGATIVE.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Jeffrey Yin                     

Member since: 04/09/2020

241 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team S7-G17, Paton Spring 2020                        

                                                  Member of Cal Poly, Team S7-G17, Paton Spring 2020 



                    CPSU-PATON-S20S7G17                     


                                            3 Members                     


                                            6 Guides authored