Verizon Wireless Cdm 7075 Keypad Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

• Battery
• 2 steps
• Keypad
• 5 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackVerizon Wireless CDM7075

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the back panel by first pressing and holding the gray button on the back. While doing that also press and slide the panel down and off.

Remove the back panel by first pressing and holding the gray button on the back. While doing that also press and slide the panel down and off.

1024

Step 2

• Carefully remove the battery from the phone by prying the battery from the top.

Carefully remove the battery from the phone by prying the battery from the top.

Step 3

              Keypad               

• Pry off the top cover on the back of the phone.

Pry off the top cover on the back of the phone.

Step 4

• You will then remove the screws from the back of the phone.

You will then remove the screws from the back of the phone.

Step 5

• Next you will pry apart the two halves of the phone.
• Make sure you do not to damage the ribbon cable connecting both halves

Next you will pry apart the two halves of the phone.

Make sure you do not to damage the ribbon cable connecting both halves

Step 6

• Then use the plastic opening tool to remove the motherboard from the front half of the phone.

Then use the plastic opening tool to remove the motherboard from the front half of the phone.

Step 7

• Next you will peel off the keypad after the motherboard is removed.
• Be sure you do not to tear the brown connector tape.
• Lastly insert the new keypad.

Next you will peel off the keypad after the motherboard is removed.

Be sure you do not to tear the brown connector tape.

Lastly insert the new keypad.

To reassemble your device follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 6 other contributors 

                    Corey Ryman                     

Member since: 10/14/2011

255 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       James Madison, Team 2-4, Allen Fall 2011                        

                                                  Member of James Madison, Team 2-4, Allen Fall 2011 



                    JMU-ALLEN-F11S2G4                     


                                            3 Members                     


                                            8 Guides authored