Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Plastic Case
- 5 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackVerizon Ellipsis Jetpack MHS800L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Plastic Case
- Remove the SIM card, that is located on top of the Jetpack.
Remove the SIM card, that is located on top of the Jetpack.
1024
Step 2
- With the device on its back and the label facing you, remove the rubber screw cover on the top left corner of the device.
- Under the rubber circle, remove the 1.25 mm screw using a Philips #00 screwdriver.
- You may need to peel back a piece of double sided tape covering the screw hole.
With the device on its back and the label facing you, remove the rubber screw cover on the top left corner of the device.
Under the rubber circle, remove the 1.25 mm screw using a Philips #00 screwdriver.
You may need to peel back a piece of double sided tape covering the screw hole.
Step 3
- Remove three 1.25 mm screws.
Remove three 1.25 mm screws.
Step 4
- Use a plastic opening tool at the seams and pry open the case.
Use a plastic opening tool at the seams and pry open the case.
Step 5
- Once the cover is off, this is what your device will look like.
Once the cover is off, this is what your device will look like.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Richard J Porras
Member since: 01/23/2016
504 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
IUPUI, Team 3-3, Baechle Spring 2016
Member of IUPUI, Team 3-3, Baechle Spring 2016
IUPUI-BAECHLE-S16S3G3
4 Members
6 Guides authored
