Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

3

  • Battery
  • 4 steps
  • Speaker
  • 1 step
  • Screen
  • 1 step

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackVerizon Ellipsis 8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Using a plastic opening tool, slowly pry along the seam running along the edge of the device until the back case snaps free.
  • Remove the back case.

Using a plastic opening tool, slowly pry along the seam running along the edge of the device until the back case snaps free.

Remove the back case.

1024

Step 2

  • Using a Phillips #00 screwdriver, remove the two 0.1 mm screws on the green bracket.

Using a Phillips #00 screwdriver, remove the two 0.1 mm screws on the green bracket.

Step 3

  • Once you remove the backing of the Verizon Ellipsis 8, gently use the spudger to lift one side of the tape. Once you have lifted the tape, slowly remove it until it is completely off the battery.

Once you remove the backing of the Verizon Ellipsis 8, gently use the spudger to lift one side of the tape. Once you have lifted the tape, slowly remove it until it is completely off the battery.

Step 4

  • Lift and remove the battery from the device.

Lift and remove the battery from the device.

Step 5

              Speaker
  • Remove all 5 screws from their respective holes using the Phillips #00 screwdriver.
  • Remove the speaker from the device.

Remove all 5 screws from their respective holes using the Phillips #00 screwdriver.

Remove the speaker from the device.

Step 6

              Screen
  • Using a guitar pick or a metal spudger, remove the old screen from the device from the back of the tablet.

Using a guitar pick or a metal spudger, remove the old screen from the device from the back of the tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Sreedhar Kesari

Member since: 11/11/2019

190 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S2-G2, Stella Fall 2019                        

                                                  Member of IUPUI, Team S2-G2, Stella Fall 2019 



                    IUPUI-STELLA-F19S2G2                     


                                            4 Members                     


                                            2 Guides authored