Verizon Ellipsis 10 Battery Replacement Repair Guide

Difficulty

Very easy

Steps

9

Time Required

                          10 minutes            

Sections

2

• Back Cover
• 4 steps
• Battery
• 5 steps

Flags

0

• BackVerizon Ellipsis 10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Open the SD/SIM card cover to start prying off the back cover.

Open the SD/SIM card cover to start prying off the back cover.

1024

Step 2

• Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

Step 3

• Follow along the edge of the device to undo all of the retaining clips.

Follow along the edge of the device to undo all of the retaining clips.

Step 4

• Once all the clips are undone, the back panel should come off with little effort.

Once all the clips are undone, the back panel should come off with little effort.

Step 5

              Battery               

• Remove the bottom piece of tape securing the battery making sure you are not peeling up anything else in the process.

Remove the bottom piece of tape securing the battery making sure you are not peeling up anything else in the process.

Step 6

• Remove the top piece of tape using an iFixit opening tool.

Remove the top piece of tape using an iFixit opening tool.

Step 7

• Once you have a hold on the tape, carefully remove it making sure you aren’t damaging the battery in the process.

Once you have a hold on the tape, carefully remove it making sure you aren’t damaging the battery in the process.

Step 8

• Unplug the battery power connector by sliding the white plastic plug down away from the board.

Unplug the battery power connector by sliding the white plastic plug down away from the board.

Step 9

• The battery should be free to come out of the device. Make sure not to bend or damage the battery.

The battery should be free to come out of the device. Make sure not to bend or damage the battery.

To reassemble your device, follow these instructions in reverse order using new tape to secure the battery.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Mary Duran                     

Member since: 04/03/2019

597 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Oregon Institute of Technology, Team S2-G10, Lancaster Spring 2019                        

                                                  Member of Oregon Institute of Technology, Team S2-G10, Lancaster Spring 2019 



                    OIT-LANCASTER-S19S2G10                     


                                            4 Members                     


                                            7 Guides authored                     

brianmjones - Jun 21, 2019

Reply

Has anyone found a source for these batteries?