Featured
Featured Guide
Difficulty
Easy
Steps
5
Time Required
5 - 15 minutes
Sections
2
- Battery
- 2 steps
- Keyboard
- 3 steps
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackVelocity NoteMagix M10 A82
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Place the notebook on the table, with the battery facing away from you.
- Slide the switch from “lock” to “unlock” with your right hand on the right side of the computer.
- Maintain holding the right switch in the “unlock” position.
- Use your left hand to slide the left switch from “lock” to “unlock”.
Place the notebook on the table, with the battery facing away from you.
Slide the switch from “lock” to “unlock” with your right hand on the right side of the computer.
Maintain holding the right switch in the “unlock” position.
Use your left hand to slide the left switch from “lock” to “unlock”.
1024
Step 2
- Maintain both left and right switches in the “unlock” position.
- Use your forefingers to push the battery out of the computer.
Maintain both left and right switches in the “unlock” position.
Use your forefingers to push the battery out of the computer.
Step 3
Keyboard
- Place the laptop fully opened with the keyboard facing upwards.
- Remove the hinge cover by wedging the spudger underneath at the bottom edge and gently prying upwards while sliding the spudger along the cover.
Place the laptop fully opened with the keyboard facing upwards.
Remove the hinge cover by wedging the spudger underneath at the bottom edge and gently prying upwards while sliding the spudger along the cover.
Step 4
- Carefully remove the keyboard by lifting the top of the keyboard closest to the screen.
- Pull the keyboard away from the mousepad.
- Be careful to not damage the ribbon underneath the keyboard that connects the keyboard to the computer during removal.
Carefully remove the keyboard by lifting the top of the keyboard closest to the screen.
Pull the keyboard away from the mousepad.
Be careful to not damage the ribbon underneath the keyboard that connects the keyboard to the computer during removal.
Step 5
- Wedge the spudger between the plastic clamp that holds the ribbon in place and carefully pry the connector off.
Wedge the spudger between the plastic clamp that holds the ribbon in place and carefully pry the connector off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Sam Middleton
Member since: 10/01/2013
401 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 14-9, Forte Fall 2013
Member of Cal Poly, Team 14-9, Forte Fall 2013
CPSU-FORTE-F13S14G9
5 Members
6 Guides authored