Difficulty
Moderate
Steps
14
Time Required
15 minutes
Sections
1
- Screen Display.
- 14 steps
Flags
5
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
Backvelocity micro tablet T301
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen Display.
- Insert the plastic opening tool in the SD port. The edge point should be pointed towards the rear panel.
Insert the plastic opening tool in the SD port. The edge point should be pointed towards the rear panel.
1024
Step 2
- Insert a small opening tool between the rear panel and the tablet.
Insert a small opening tool between the rear panel and the tablet.
Step 3
- The large opening tool is not needed any more.
The large opening tool is not needed any more.
Step 4
- Move the small tool opener around the rear panel to free the 12 edges.
Move the small tool opener around the rear panel to free the 12 edges.
Step 5
- Using PH0 Phillips Driver, remove the 4 Screws in the Metal part.
Using PH0 Phillips Driver, remove the 4 Screws in the Metal part.
Step 6
- Using a plastic Spudger remove the battery connector.
Using a plastic Spudger remove the battery connector.
Step 7
- Using PH0 Phillips Driver, remove the 12 Screws in the cover.
Using PH0 Phillips Driver, remove the 12 Screws in the cover.
Step 8
- Place a metal Spudger between the tablet and the back cover.
Place a metal Spudger between the tablet and the back cover.
Step 9
- Move the spudger around the tablet to release the clips attached to the tablet.
Move the spudger around the tablet to release the clips attached to the tablet.
Step 10
- Use a plastic spudger to release the connection between the speakers and the motherboard as shown in the picture.
Use a plastic spudger to release the connection between the speakers and the motherboard as shown in the picture.
Step 11
- Using a metal spudger to remove the top plug connector from the motherboard.
Using a metal spudger to remove the top plug connector from the motherboard.
Step 12
- Use a metal spudger to remove both screen cable connectors.
Use a metal spudger to remove both screen cable connectors.
Step 13
- use openning tools to remove the motherboard.
use openning tools to remove the motherboard.
Step 14
- Remove the motherboard cover to reach in the screen display.
Remove the motherboard cover to reach in the screen display.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
James Napoleon
Member since: 10/05/2016
101 Reputation
1 Guide authored
Badges:
3
Team
USF Tampa, Team 1-6, Cagle Fall 2016
Member of USF Tampa, Team 1-6, Cagle Fall 2016
USFT-CAGLE-F16S1G6
3 Members
5 Guides authored