Velocity Micro Cruz T301 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes            

Sections

1

• Battery
• 6 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackVelocity Micro Cruz T301

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This guide shows how to take off the back panel and remove the battery. After replacing the battery, the device will need to be reassembled in the opposite order.

The battery powers the tablet and may need to be replaced if the device will not turn on. The tablet will also need to be replaced if it does not hold a charge.

If the battery seems to be damaged or swollen, use this guide to safely remove the battery.

Make sure that the device is turned off before using this guide.

What you need

Step 1

              Battery               

• Insert the plastic iFixit opening tool into the SD port. Orient the iFixit opening tool so that the edge faces the rear panel.

Insert the plastic iFixit opening tool into the SD port. Orient the iFixit opening tool so that the edge faces the rear panel.

1024

Step 2

• Use the iFixit opening tools to pry open a gap between the tablet and rear panel.

Use the iFixit opening tools to pry open a gap between the tablet and rear panel.

Step 3

• Move the small tool opener around the rear panel to free the 12 clips.

Move the small tool opener around the rear panel to free the 12 clips.

Step 4

• Remove the four screws in the metal battery housing using the Phillips #0 screwdriver.

Remove the four screws in the metal battery housing using the Phillips #0 screwdriver.

Step 5

• Disconnect the battery using the spudger.

Disconnect the battery using the spudger.

Step 6

• Lift the battery out of its place with a nylon spudger.
• This photo shows the use of an incorrect tool. Always use an ESD safe tool, like the nylon spudger, when dealing with delicate components.

Lift the battery out of its place with a nylon spudger.

This photo shows the use of an incorrect tool. Always use an ESD safe tool, like the nylon spudger, when dealing with delicate components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Ali Rashid Al Araimi                     

Member since: 10/05/2016

371 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 1-6, Cagle Fall 2016                        

                                                  Member of USF Tampa, Team 1-6, Cagle Fall 2016 



                    USFT-CAGLE-F16S1G6                     


                                            3 Members                     


                                            5 Guides authored