Difficulty

Moderate

Steps

5

Time Required

                          30 - 45 minutes

Sections

1

  • Speaker
  • 5 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackVelocity Micro Cruz T410

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Back
  • Using one of the plastic opening tools, separate the plastic back from the tablet in one spot.
  • Gently work the tool around the diameter of the tablet until the back pops completely off.

Using one of the plastic opening tools, separate the plastic back from the tablet in one spot.

Gently work the tool around the diameter of the tablet until the back pops completely off.

1024

Step 2

              Remove All Screws
  • Use the screwdrivers to remove all the screws.
  • Ensure that all screws are removed before moving on to the next step.

Use the screwdrivers to remove all the screws.

Ensure that all screws are removed before moving on to the next step.

Step 3

              Remove LCD Connector
  • Remove the bottom LCD connector by gently pulling it away from the motherboard.

Remove the bottom LCD connector by gently pulling it away from the motherboard.

Step 4

              Separate the Frame from the Housing
  • Identify the speaker wires.
  • Use a plastic opening tool to gently pry underneath the frame of the grey plastic frame until it completely separates from the housing.

Identify the speaker wires.

Use a plastic opening tool to gently pry underneath the frame of the grey plastic frame until it completely separates from the housing.

Step 5

              Remove and Replace the Speaker
  • Use the wire cutters to clip the speaker wires in the middle
  • Use a plastic opening tool to remove the speaker.
  • Insert the new speaker in its place and solder the old and new wires together.
  • For soldering help, check out iFixit’s How to Solder and Desolder Connections guide.

Use the wire cutters to clip the speaker wires in the middle

Use a plastic opening tool to remove the speaker.

Insert the new speaker in its place and solder the old and new wires together.

For soldering help, check out iFixit’s How to Solder and Desolder Connections guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    T Smith

Member since: 11/02/2016

205 Reputation

                                      2 Guides authored                  



                       Badges:
                       2