Difficulty

Moderate

Steps

3

Time Required

                          45 minutes

Sections

1

  • Battery
  • 3 steps

Flags

0

  • BackVelocity Micro Cruz T410

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Insert a plastic opening device into the small crack separating the screen and the back of the device.
  • After the back of the device is separated, remove the back and you can now access the battery.
  • When prying the back of the device off, be careful as this could cause small damages or cracks to the screen.

Insert a plastic opening device into the small crack separating the screen and the back of the device.

After the back of the device is separated, remove the back and you can now access the battery.

When prying the back of the device off, be careful as this could cause small damages or cracks to the screen.

1024

Step 2

  • The battery is connected to the motherboard where the picture indicates.
  • To remove the battery, you must first detach the battery wire connecting it from the motherboard. To do this, simply gently, but firmly, pull it out of the motherboard connector.

The battery is connected to the motherboard where the picture indicates.

To remove the battery, you must first detach the battery wire connecting it from the motherboard. To do this, simply gently, but firmly, pull it out of the motherboard connector.

Step 3

  • Simply pry the battery out of the device at this point. The battery may be held in place by adhesive glue and require a nylon spudger or plastic opening tool to help pry it out.
  • Place your new battery in place of the old one. Connect the new battery’s wire to the motherboard and you are finished.

Simply pry the battery out of the device at this point. The battery may be held in place by adhesive glue and require a nylon spudger or plastic opening tool to help pry it out.

Place your new battery in place of the old one. Connect the new battery’s wire to the motherboard and you are finished.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Hunter Ralston

Member since: 10/10/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Texas Tech, Team 12-4, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 12-4, Bennett Fall 2016 



                    TTU-BENNETT-F16S12G4                     


                                            4 Members                     


                                            2 Guides authored