Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Battery
  • 3 steps
  • Camera
  • 5 steps

Flags

0

  • BackUTStarcom XV6700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Press the on/off button on the top to power the phone off.

Press the on/off button on the top to power the phone off.

1024

Step 2

  • Remove the battery cover by pressing and sliding the cover down and off of the phone.

Remove the battery cover by pressing and sliding the cover down and off of the phone.

Step 3

  • Pull the battery removal tab and lift the battery out of the phone.
  • If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

Pull the battery removal tab and lift the battery out of the phone.

If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

Step 4

              Camera
  • Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.

Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.

Step 5

  • Use firm pressure to carefully pry off the cover with your fingers.

Use firm pressure to carefully pry off the cover with your fingers.

Step 6

  • Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

Step 7

  • Gently pry off the camera flash circuit board with the spudger.

Gently pry off the camera flash circuit board with the spudger.

Step 8

  • Gently pry off the camera with the spudger.

Gently pry off the camera with the spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jesse Walker

Member since: 06/04/2013

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       University of Kentucky Louisville, Team 1-4, Chamberlain Spring 2013                        

                                                  Member of University of Kentucky Louisville, Team 1-4, Chamberlain Spring 2013 



                    LOUISVILLE-CHAMBERLAIN-S13S1G4                     


                                            3 Members                     


                                            8 Guides authored